一、 Functional Characteristics

1.Stratification independent drive for precise synchronization

2.Traditional composite plastic machines are mechanical synchronization or frequency synchronization by the above

two methods in actual use are lower than the absolute synchronization effect, it will waste a lot of paste and reduce

the production rate, affecting the quality of cardboard , factory using unique differential synchronizer way synchronization

ensures consistent paste on any case conditions. Compared to other manufacturers, 20% -30% amount of paste can be saved

3.Glue roll is processed by cobwebbing, save paste and avoid splash. All rotation rolls are processed by dynamic balance

4.Paste gap control and roll gap width can be adjusted by the button in PLC, also can be automatically adjusted with

line speed though PLC. Paste tray is pneumatic lifting, easy for cleaning and maintenance

5.Pasting angel will be designed according to the site, to make sure the paste is applied onto the corrugated tooth tip

二、Technical Parameters

1.Mechanical and production speed: 300M / min

2.Glue line within 1.2mm

3.Imported PLC

4.Taiwan"Chengbang" reducer motor 3.7KW

5.Imported Display

6.Servo motor

7."Fulong" synchronous belt