一、Functional Characteristics

1.The seat is equipped with hydraulic steering rod bearings, to eliminate the damage cause by foundation

deformation to the hydraulic cylinder;

2.The lock hole of lift arm is equipped with bearing steel sleeve, to improve the service life and easy to replace.

3.The hydraulic lift at left and right, more stable operation and longer service life.；

4.For traditional mill roll stand, there is only one oil cylinder to drive main arm to lift up paper roll

. During long use period, affected by leverage, the other arm that not lifted by oil cylinder will

distort and bend due to uneven stress. Especially when using wide-with paper, it is one side higher

while another side lower, cause paper easily broken and uneven tension, hence, that will increase the waste

products and cardboards of bad flatness. XHL’s mill roll stand is equipped with oil cylinder at each axle to lif

t up at the same time, even drain, make sure main axle and arm won’t distort during long use period

二、Technical Parameters

1.Maximum clamping diameter is 1500MM

2.Standard configuration: multi-point brake, expansion type clamping head

3.Taiwan oil hydraulic system,hydraulic pressure station motor 5.5KW

4.FRA "Schneider" electric apparatus

5."AIRTAC" pneumatic components